Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser makes use of the latest technology to ward off car theft. This discreet device is unnoticeable by thieves, and only starts the engine after a PIN or app is entered.
It's weatherproof and connects to the CAN data network of your vehicle. It features a service/valet function that allows you to temporarily start your vehicle when it is in garage.
Easy to install
The Ghost immobiliser shields your car from key theft, cloning and hacking. It utilizes a PIN code system that is integrated into the car's electronic control unit, making it hard for thieves to detect. In contrast to traditional immobilisers, it does not require any special keys or sensors, and is completely hidden from view with no LEDs or signals that signal its presence. It is also cheaper than replacing an ECU or installing a new key fob and can lower your monthly insurance premiums.
Follow the instructions of the manufacturer when installing follow the manufacturer's instructions when installing a Ghost 2 vehicle immobiliser. This will ensure that the device is working correctly and efficiently. Test the system after installation by entering the PIN and then starting the car. Regular testing will allow you to identify any problems in the early stages.
Make sure you check the position of the CAN H and L wires prior to beginning the installation. They are essential to power the immobiliser, so it is crucial that they are properly connected. Labelling the wires can aid in locating them when installing. Once you have identified the locations of these wires, connect them to a continuous 12V power source and the grounding point. Be sure to use a fuse tap if needed to protect the connections from short circuits or damage.
After connecting the wires, tidy the wires using cable ties to prevent tampering. It is also recommended to cover the connections with insulation tape or heat shrink tubing. This will protect them from electrical shorts and extend the life of the device. It is a good idea to test your Ghost 2 immobiliser once the wiring is secured.
In the event that you have to surrender your vehicle, for instance for servicing or valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. To activate this feature, simply press the brake pedal while pressing the accelerator, a number of times that is equal to the first digit of the emergency code. The system will then enter service mode. This can be confirmed by flashing 5 times the indicator signal.
Change PIN codes easily
Ghost 2 immobilisers are an excellent way to safeguard your vehicle from theft. It is hidden inside the vehicle, and is only accessible by a special code. The device communicates with the vehicle ECU through its data bus and does not rely on radio frequency signals like traditional alarm systems or aftermarket Thatcham immobilisers do. This makes it difficult for thieves to hear the click of an immobiliser relay, or add new keys. The control unit is concealed within the vehicle's wiring harness or dashboard and cannot be physically altered to reset the system.
The ghost 2 immobiliser connects to your vehicles CAN Data network and uses the buttons already present on the steering wheel, door panels, and the centre console to create a customisable sequence of up 20 button presses. These must be entered before the engine starts as it would with a PIN code. This unique next generation system does not require any cutting of wires when it is installed and is fully reprogrammable at anytime. You can also put your vehicle in Valet or Service mode to allow it to be started temporarily when giving it to a mechanic to work.
The app can also be used to disable your PIN code in the event that you've lost your keys, or change it. This feature is particularly useful when you have lent your vehicle to someone else for valet parking or servicing since it prevents them from starting your vehicle and driving away without your consent. It is also undetectable to professional thieves as it doesn't make use of any circuit cuts or radio frequencies.
Another benefit of the ghost 2 immobiliser is its ability to prevent thefts of relays. Relay theft is a common method of car theft, where the criminals attack your car's diagnostic port and then alter the signal sent by the key to the vehicle's ECU in order to fool it into thinking that there is a valid key. This is how traditional immobilisers can be bypassed, but with a ghost 2 immobiliser, the signal is blocked before it can reach the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that shields your vehicle from key-cloning, hacking and key theft. It connects to the CAN data network of your vehicle and requires an PIN code to start the engine. It also deters thieves from using signal spoofing and device spoofing, which are both common techniques employed to steal vehicles.
The system is easy to use and operates similar to a standard car alarm. Installing the system will allow you to create a unique 20-digit pin code that must be entered prior to starting the vehicle. This will stop the vehicle from being taken even if the keys are stolen. You can turn off the system with an app for your smartphone.
The ghost is silent, and it does emit radio frequency signals. It is a discreet, weatherproof device that can be positioned anywhere in your vehicle. It can be concealed beneath the dash, steering wheel, or door panels. It communicates with your ECU through the CAN data circuit and is not affected by diagnostic tools that thieves use to find security systems. It is also not affected by jamming devices which spoof codes.
It is a covert installation that does not require any wire cutting or modifications to the vehicle and can be employed as an anti-theft device for any vehicle. Its technology has been proven be effective and in compliance with TASSA standards. The ghost is a great solution for classic, sports and prestige automobiles, and can be used to safeguard cars that are hired out through apps such as Turo.
autowatch ghost immobiliser cost is the next generation of car immobilisers. This system is undetectable to thieves and prevents the vehicle from starting without a PIN or are authorised by the app. It does not emit radio frequencies or other signals scanners could detect. The installation process is easy and quick. The app comes with a simple interface and simple navigation. It also includes a GPS tracker that can help police locate and locate the vehicle.
Easy to reset
It is possible to safeguard your vehicle from theft by using a ghost 2 immobiliser. It integrates with your vehicle's ECU to create a barrier that thieves cannot break through without a valid PIN. The device is also TASSA-verified, which means that it's acknowledged by insurance companies. It's a great device to prevent car theft, and it could save you a significant amount of money over the long term.
In contrast to traditional alarms and immobilisers that require cutting of circuits and circuit cutting, the Ghost system is directly connected to the vehicle's CAN network and operates with the existing buttons on the dashboard and the steering wheel. You can create an individual PIN sequence that is up to 20 presses in length. The PIN must be entered before the engine can start like the credit card PIN. Ghost is unnoticeable to thieves, and there are no indicators that give away its presence making it the most reliable aftermarket CAN bus immobiliser available on the market currently.
Another advantage of the Ghost system is that it does not utilize radio frequency signals, meaning it cannot be scannable or intercepted by thieves. This is a deterrent to key attacks that replicate and relay attacks, as well as the common method of hacking into a car's computer system using its CAN bus by scanning for signals. Additionally, the Ghost system is designed to be completely hidden in the vehicle, and there aren't any lights or other signals that signalize its presence.
The system also has the option of a Transport Mode that disables the Ghost system, which is useful for situations in which you have to temporarily deactivate it, such as during transportation or maintenance. This mode isn't as effective as Service Mode as it doesn't deactivate the Ghost system if you exceed 31 mph within 15 minutes.
To reset your ghost 2 immobiliser, you will need to have the emergency code, which you can obtain from your installer. It is usually hidden under a scratch-off area on the card that was supplied with the installation. This emergency code should be kept secure and stored in a secure location like your wallet at home.